Can-Am MAVERICK X3 Series 2017 Operator's Manual page 16

PRE-RIDE INSPECTION
ITEMS TO BE
INSPECTED
Seats, doors and
seat belts
Accelerator pedal
Brake pedal
Fuel level
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
Steering
RF D.E.S.S. post
Shift lever
2WD/4WD selector
Brakes
_______
14
INSPECTION TO PERFORM
Check seat adjustment and make sure locking device is
properly engaged before riding.
Check doors for any damage. Have the
doors replaced if any damage is found.
Close both doors and confirm that they latch
securely.
Check seat belts for any damage (including retractors,
buckles and locking tabs). Fasten seat belts and ensure
that they remain securely fastened and tightened against
the body
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
Press down on the brake pedal and make sure you feel
firm resistance and that it fully returns to position when
released.
Check the fuel level.
INSPECTION TO PERFORM
Check if steering operates freely by completely turning it
from side to side.
Check if D.E.S.S. post is working properly by pulling the
D.E.S.S. key from D.E.S.S. post.
Check operation of shift lever (P, R, N, H and L).
Check operation of 2WD/4WD selector.
Drive forward slowly a few feet and apply brakes. The
brake pedal must feel firm when applied. The pedal must
return to rest position when released. The brakes must
respond adequately to the driver's input.
SAFETY INFORMATION
________
✔
✔