Suspensions - Can-Am MAVERICK X3 Series 2017 Operator's Manual

MAINTENANCE PROCEDURES
– Check tire position on wheel and
reposition it if necessary.
– Restart the torquing sequence as
detailed.
7. Torque beadlock screws a final time
following the indicated sequence.
TIGHTENING TORQUE
Beadlock
screws (FINAL
TORQUE)
tmo2015-017-303_c
TYPICAL - FINAL TIGHTENING SEQUENCE
8. Inflate tire to seat the inner bead on
wheel. Always use safe practices,
such as a tire safety cage.
WARNING
Never exceed tire's recommended
maximum pressure for seating
beads.

Suspensions

Front Suspension Lubrication
Use SUSPENSION GREASE (P/N 293
550 033) or an equivalent.
Lubricate upper and lower suspension
arms.
There are 2 grease fittings on each sus-
pension arm.
______________
104
29 N•m ± 1 N•m
(21 lbf•ft ± 1 lbf•ft)
219001761-108_a
TYPICAL - FRONT SUSPENSION
1. Grease fittings
219001761-109_a
TYPICAL - FRONT SUSPENSION
1. Grease fittings
Stabilizer Bar Lubrication
Use SUSPENSION GREASE (P/N 293
550 033) or an equivalent.
There is one grease fitting on each
front suspension side.
219001761-110_a
TYPICAL - FRONT STABILIZER BAR
1. Grease fitting
There is one grease fitting on each rear
suspension side.