A.connections To 7720 Long Range Radio - ADEMCO VISTA-100 Isntallation Instructions And Programming Manual

VISTA-100 Installation Instructions
The fire and burglary/audible panic alarm triggers remain HIGH until a [User Code] + OFF
is entered in all enabled partition(s) which display these conditions. The silent panic/duress
trigger works the same way, except that it is momentary when initiated by duress.
The fire supervisory and trouble triggers remain HIGH until the underlying faults are
corrected and the [User Code] + OFF is entered in all enabled partition(s) which display
these conditions.
Figures 12-5a, b, and c show connection configurations for the 7720, 7720ULF, and 7920SE
Long Range Radios.
7720 WIRING DIAGRAM
4142TR
CABLE
4142TR
CABLE
WIRE
COLORS
12-6
J2 CONNECTOR
1 2 3 4 5 6 7 8
NOTE:
• MOUNT THE 7720 WITHIN 3 FEET OF THE C-COM. RUN WIRING FROM C-COM TO 7720 IN CONDUIT.
Figure 12-5a. Connections to 7720 Long Range Radio
9
7720 RADIO
(USE 7720 ULF INSTEAD
FOR COMMERCIAL FIRE
INSTALLATIONS)
RADIO FAULT (PROGRAM FOR SHORT ON FAULT)
GROUND
FIRE ALARM
BURG/AUDIBLE PANIC ALARM
TROUBLE (ZONE TROUBLE, TELCO FAULT, ETC.)
SILENT PANIC/DURESS ALARM
SEE 7720 INSTRUCTIONS FOR
MORE DETAILED INSTALLATION
INFORMATION
1 2 3 4 5 6 7 8
FAULT
9 10 11