Module Termination - ABB S800 Product Manual

Section 2 Product Description

Module Termination

The MTUs are totally passive units and all active circuitry is allocated to
the I/O module containing process connections and ModuleBus part.
For more details, refer
Module
Type
TU805
TU810/
TU810V1
TU811/
TU811V1
TU812/
TU812V1
TU813
TU814/
TU814V1
TU818
TU819
3BSE015969-600 A
Module Termination Unit
Table 3. S800M I/O Termination Units
Terminal Unit, 2*18 terminals, 50 V. Used to enable 2 - and 3-wire
connections on DI801 and DO801. The Terminal Unit is mounted
direct on DI801 or DO801.
Compact MTU, 3 8 + 2
*
d.c binary and -20 - +20 mA analog modules for minimum DIN-rail
space.
Compact MTU, 2 8 terminals, 250 V. Typically used with 120/230 V
*
d.c/a.c binary modules or relay outputs for minimum DIN-rail space.
Compact MTU, 25 pin D-sub Connector for field connection, 50 V
Typically used with 24/48 V d.c binary and -20 - +20 mA analog
modules providing easy and fast installation with pre-fabricated
cables.
Compact MTU, Crimp Snap-in Connector for field connection,
(2)
250 V . Typically used with 120/230 V d.c/a.c. binary modules. The
Crimp Snap-in connector type makes it possible to mix parts from
different cables into the same MTU and pre-fabricate the cabling.
Compact MTU, Crimp Snap-in Connector for field connection,
(3)
50 V . Typically used with 24/48 V d.c binary and -20 - +20 mA
analog modules. The Crimp Snap-in connector type makes it possible
to mix parts from different cables into the same MTU and pre-fabricate
the cabling.
Compact MTU, 40 pole screw terminal connector for field connection,
50 V.
Compact MTU, Two D-sub 25 pin connector for field connection, 50V.
on page 63.
Description
3 terminals, 50 V. Typically used with 24/48 V
*
Module Termination
(1)
.
37