Supported I/O Modules and Drives via PROFIBUS and CI840
Supported I/O Modules and Drives via PROFIBUS and
CI840
The following I/O modules are supported by the PROFIBUS Field
Communication Interface module CI840. Check the controller documentation for
information about I/O module support implemented in the controller:
•
•
•
•
•
1. Not supported by AC 800M
160
–
ACS600/ACS800/DCS600 with crane application
–
ACS600/ACS800 with pump and fan application (PFC)
–
ACS400/DCS500/DCS400 with standard drive
AI801, AI810, AI815, AI820, AI825, AI830, AI830A, AI835, AI843, AI845,
AI890, AI893, AI895
AO801, AO810, AO815, AO810V2, AO820, AO845, AO845A, AO890,
AO895
DI801, DI802, DI803, DI810, DI811, DI814, DI818, DI820, DI821, DI828,
1
DI825
, DI830
1
,
DI831
DO801, DO802, DO810, DO814, DO815, DO818, DO820, DO821, DO828,
DO840, DO890
DP820, DP840
1
, DI840 (SOE handling not supported), DI885
Section 3 Technical Data and
3BSE015969-600 A
1
, DI890