ABB S800 Product Manual page 15

GENERAL
WARNINGS
SPECIFIC
WARNINGS
SPECIFIC
CAUTIONS
3BSE015969-600 A
Electrostatic Sensitive Device
Devices labeled with this symbol require special handling precautions as
described in the installation section.
Equipment Environment
All components, whether in transportation, operation or storage, must be
in a non-corrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with ener-
gized parts is avoided when servicing.
Page 109: In I.S. applications, modules with I.S. Interfaces MUST be
mounted right most of the I/O station or as a separate group.
The installation must be performed by qualified personnel. It must comply
with the relevant national/international standards (e.g. IEC 79-14, CEI
64-2, BS 5345 Pt. 4, DIN VDE 165) and in-line with the established instal-
lation rules and recommended practice (e.g. CEI 64-8, ANSI/ISA
RP-12.6). The conformity of hazardous area field devices with the related
system documentation must always be checked.
When using modules with I.S. Interfaces in non I.S. applications, the I.S.
modules can be placed in any position following the same rules as non
I.S. modules.
Page 121: The calculated load of Advant Fieldbus 100 must be equal to
or less than 70%.
Page 123: The calculated load of Advant Fieldbus 100 must be equal to
or less than 50%. NOTE! 1 ms cycle time is not allowed.
Page 124: The calculated load of Advant Fieldbus 100 must be equal to
or less than 50%. NOTE! 1 ms cycle time is not allowed.
Safety Summary
15