Modulebus Items - ABB S800 Product Manual

ModuleBus Items

Module
Type
Mounting
Kit
Horizontal
Mounting
Profile
(1) Connector is not enclosed.
(2) The three cable plugs are enclosed, see
(3) Connector is not enclosed. Three connectors are needed, see
Table 4. Cable Connectors for TU813 and TU814, Supplied by Phoenix Contact
Part
Cable plug TU813
Cable plug TU814
Crimp snap in 
connector
Crimping tool
Remove insulation tool
ModuleBus Items
The ModuleBus supports up to 8 cluster, one base cluster and up to 7 I/O cluster,
connected to each other via optical cables, Optical ModuleBus Modems and
a ModuleBus Optical port module. The cluster is built up by MTUs and/or S800L
modules. At the last, MTU or S800L modules bus outlet a terminator module,
TB807, must be inserted.
40
Table 3. S800M I/O Termination Units (Continued)
Used for horizontal mounting of CI801, CI840 and TB840 on a vertical
DIN-rail.
Mounting profile with one DIN-rail and one cable duct.
No
1809792
1808890
1879531
3190564
3190551
1204038
1204384
Section 2 Product Description
Description
Table 4.
Table
Name
MSTBC 2.5/8-STZF-5.08
MSTBC 2.5/10-ST-5.08
MSTBC-MT 0.2-0.5
MSTBC-MT 0.5-1.0
MSTBC-MT 1.5-2.5
CRIMPFOX MT 2.5
QUICK WIREFOX 6
4.
3BSE015969-600 A