ABB S800 Product Manual page 57

Section 2 Product Description
Figure 14. Example of Connection between S800 I/O and
Intrinsic Safety System from Pepperl+Fuchs
Pepperl+Fuchs can provide a HART protocol connection to I/O modules integrated
with the Intrinsic Safety system using the MUX 2700 Remote Board for HART.
Figure 15. Example of Connection between S800 I/O and
Intrinsic Safety System and HART Protocol Connection
Connection to ABB Entrelec Interfast Pre-wiring Solutions
ABB Entrelec offers solutions for fast termination solutions with pre-wired cables
and an assortment of terminations and signal adaptions. This offer connects to S800
I/O via the TU812 termination unit which provides a D-sub connector. Multipurpose
cables are also available. Further information is available in the ABB Entrelec
catalog "Pre-wiring system for PLC's, Interfast", 1SNC127001C0206.
Connection to Phoenix Contact Varioface solutions
The Phoenix Contact offers solutions for fast termination solutions with pre-wired
cables and an assortment of terminations and signal adaptions. This offer connects
3BSE015969-600 A
Support for Externally Connected Accessories


57