ABB S800 Product Manual page 36

Fieldbus Communication Interface
optional user text and item number are also provided. The communication plugs can
be inserted/removed without interrupting the communication between stations on
the bus.
The type designation CI810 in this document includes all types of models CI810,
CI810V1, CI810V2, CI810A and CI810B if no other information is given.
Module
CI801
CI810
CI820/
CI820V1
CI840/
CI840A
TB815
TU846
TU847
(1) Always check the controller documentation for information about supported functionality.
36
Table 2. Fieldbus Communication Interface
Type
Fieldbus Communication Interface for PROFIBUS-DPV1.
Support for Hot Configuration in Run and HART pass-through
PROFIBUS Modem for twisted pair cable.
Power supply 24 V (19.2 - 30 V d.c.) Rated insulation voltage 50 V.
Single Advant Fieldbus 100 FCI.
2 x Advant Fieldbus 100 Modems for twisted pair cable.
Power supply 24 V(19.2-30 V), Rated insulation voltage 50 V.
Advant Fieldbus 100 FCI for redundancy configuration.
Advant Fieldbus 100 modem for twisted pair cable.
Power supply 24 V (19.2-30 V), Rated insulation voltage 50 V.
Fieldbus Communication Interface for PROFIBUS-DPV1 for
redundancy configuration.
Support for Hot Configuration in Run and HART pass-through
PROFIBUS Modem for twisted pair cable.
Power supply 24 V (19.2 - 30 V d.c.) Rated insulation voltage 50 V.
Interconnection unit used with CI820/CI820V1.
Module Termination Unit for dual CI840, redundant I/O.
Module Termination Unit for dual CI840, non-redundant I/O.
Also in a G3 compliant version (TU847Z).
Section 2 Product Description
Description
(1)
.
(1)
.
3BSE015969-600 A