Support For Externally Connected Accessories - ABB S800 Product Manual

Support for Externally Connected Accessories

Support for Externally Connected Accessories
Connection to External Intrinsic Safety System
The Intrinsic Safety System from Pepperl+Fuchs (manufacturer outside ABB)
is supported via S800 I/O modules and a special MTU.
The supported Intrinsic Safety System is the HiD Series 2000.
The S800 I/O modules are connected via MTU TU812/TU812V1, a standard cable
from Pepperl+Fuchs and a specific adapter board, one for each I/O module types
according to
The maximum cable length is 100 m (109 yd).
Table 8. Supported Modules and Intrinsic Safety Components
ABB delivery
S800 I/O Terminal
module unit
AI810 TU812
AO810/ TU812
AO810V2
DI810 TU812
DO810 TU812
(1) Loop-disconnected terminals
56
Table 8. The standards of cables - 0.2 m (0.66 ft) and 1.3 m (4.3 ft).
Termination and adaptor
board
2108/HAT/ABB-AI-H-01
2108/HAKE/ABB-AI-H-01
2108/HAT/ABB-AO-H-01
2108/HAKE/ABB-AO-H-01
2108/HAT/ABB-DI-01
2108/HAT/ABB-DO-01
2108/HAKE/ABB-DO-H-01
Pepperl+Fuchs delivery
Intrinsic Safety
modules
2026, 2030, 2062, 2072
(1)
2026, 2030 using
passive connection
2032, 2034, 2038
(1)
2032, 2034, 2038
2824, 2844
2872, 2874, 2876, 2878
(1)
2872, 2874, 2876, 2878
Section 2 Product Description
Note
Dual channel
modules
Dual channel
modules
Dual channel
modules
Dual channel
modules
Quad channel
modules
Dual channel
modules
Dual channel
modules
3BSE015969-600 A