Drives Integration - ABB S800 Product Manual

Drives Integration

Drives Integration
The ABB Standard and Engineered drives can be connected to the S800 I/O system.
The FCI works as a communication link between the fieldbus master and the drives.
No application software concerning this functionality is stored in the FCI. Check the
available support for each FCI type.
The following drives are considered to be standard drives:
•
•
•
•
•
•
The following drives are considered to be engineered drives:
•
•
•
•
•
•
•
•
•
•
•
•
•
52
ACS400 with standard drive
ACS600/800 with standard application
ACS600/800 with crane application
ACS600/800 with pump and fan application (PFC)
DCS400/500 with standard drive
DCS600 with crane application
ACS600/800 with system application
ACS600/800 with system application (PMSM)
ACS600/800 IGBT with supply (ISU) application
ACS600/800 with Multi Block Programming application ABxR7xxx
ACS800 with crane application
ACS800 Rolling Mill Application (RMO) A4xR7xxx
ACS800LC DSU with diode supply unit applications
ACS6000C with cyclo converter drive
ACS6000SD with synchronous drive
ACS6000AD with asynchronous drive
ACS1000 with standard drive
DCS600 with system application
DCS600 with crane application
Section 2 Product Description
3BSE015969-600 A