Using the supplied chain tension gauge
For a correct measure the bike must be placed on the
side stand. Always check the chain correct tensioning
in the point where it is stretched the most (repeat the
gaging on more equidistant points of the chain).
Note
Chain tension changes according to the set
Riding Mode. We recommend to carry out the gaging
with load setting at Level 1 ("URBAN" Riding Mode
and bike set on "RIDER ONLY").
Before proceeding lower the chain with your finger,
release it and fit the instrument (1).
The chain tensioning gage (1) must be inserted
between the swingarm and the lower chain slider in
correspondence of the slider central fixing point page
229.
232
1
Fig 172
1
Fig 173