Checking The Configuration; Configuring Acl6; Establishing The Configuration Task - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security

9.3.9 Checking the Configuration

Checking the Configuration of ACL.
Prerequisite
The configurations of the ACL are complete.
Procedure
l
l
l
----End
Example
# Run the display acl command, and you can view the ACL number, rule IDs, and step, and
rule contents.
<Quidway> display acl 3000
Advanced ACL
Acl's step is 5
rule 5 deny ip source 10.1.1.1 0
# Run the display acl name command, and you can view the ACL name, ACL number, rule
quantity, step, and rule contents.
<Quidway> display acl name test
Advanced ACL test 3999, 1 rule
Acl's step is 5
rule 5 permit tcp
# Run the display time-range command, and you can view the configuration and status of the
current time range.
<Quidway> display time-range all
Current time is 14:19:16 12-4-2008 Tuesday
Time-range : time1 ( Inactive )
10:00 to 12:00 daily
from 09:09 2008/9/9 to 23:59 2099/12/31

9.4 Configuring ACL6

This section describes how to configure basic ACL6 and advanced ACL6.

9.4.1 Establishing the Configuration Task

Establishing the Configuration Task of ACL6.
Applicable Environment
An ACL6 can be applied to the following tasks:
l
Issue 01 (2011-07-15)
Run the display acl { acl-number | all } command to check the ACL rule based on the
number.
Run the display acl name acl-name command to check the ACL rule based on the name.
Run the display time-range { all | time-name } command to check the time range.
3000, 1 rule
Configuring the packet filtering policy
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 ACL Configuration
164