Huawei Quidway S2700 Series Configuration Manual page 148

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security
Figure 6-1 Networking diagram for configuring PPPoE+
PPPoE client
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
None.
Procedure
Step 1 Enable PPPoE+.
<Quidway> system-view
[Quidway] pppoe intermediate-agent information enable
Step 2 Configure the format of information fields.
Configure the Switch to add the circuit ID in extend format to PPPoE packets, that is, the format
in hexadecimal notation is used.
[Quidway] pppoe intermediate-agent information format circuit-id extend
Issue 01 (2011-07-15)
IP network
PPPoE server
GE0/0/1
PPPoE+
Switch
Ethernet
Ethernet
0/0/1
Enable PPPoE+ globally.
NOTE
After PPPoE+ is enabled globally, PPPoE+ is enabled on all the interfaces.
Configure the contents and format of fields to be added to PPPoE packets on the Switch.
Configure the action for the Switch to process PPPoE packets.
Configure the interface connecting the Switch and the PPPoE server as the trusted interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
0/0/2
PPPoE client
6 PPPoE+ Configuration
137