Checking The Configuration - Huawei Quidway S2700 Series Configuration Manual

Hide thumbs Also See for Quidway S2700 Series:
Table of Contents

Advertisement

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security
By default, the aging function of the ND dynamic binding table is disabled.
Step 3 Run:
nd user-bind detect retransmit retransmit-times interval retransmit-interval
The detection interval and the number of detection times for aging ND dynamic binding entries
are set.
By default, the detection interval for aging ND dynamic binding entries is 1000 ms and the
number of detection times for aging ND dynamic binding entries is 2.
----End

10.3.5 Checking the Configuration

After configuring ND snooping to improve the security of an IPv6 network, you can view the
statistics about ND snooping.
Prerequisite
The configurations of ND snooping are complete.
Procedure
l
l
l
----End
Example
After the configuration is successful, you can run the display nd snooping prefix command to
view the prefix management table of ND users.
<Quidway> display nd snooping prefix
prefix-table:
Prefix
--------------------------------------------------------------------------------
3001::
--------------------------------------------------------------------------------
Prefix table total count:
Run the display nd snooping user-bind allcommand, and you can view information about the
ND dynamic binding table.
<Quidway> display nd snooping user-bind all
ND Dynamic Bind-table:
Flags:O - outer vlan ,I - inner vlan ,P - map vlan
IP Address
--------------------------------------------------------------------------------
Issue 01 (2011-07-15)
Run the display nd snooping prefix command to check prefix management entries of ND
users.
Run the display nd snooping user-bind { all | ipv6-address ipv6-address | mac-
address mac-address | interface interface-type interface-number | vlan vlan-id | vlan vlan-
id interface interface-type interface-number } command to check ND dynamic binding
entries.
Run the display this command in the system view to check the configuration of ND
snooping.
Run the display this command, and you can view the enabling of ND snooping and
information about the aging function of the ND dynamic binding table.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Length
Valid-Time
64
100000
1
MAC Address
VSI/VLAN(O/I/P) Lease
10 ND Snooping Configuration
Preferred-Time
100000
186

Advertisement

Table of Contents
loading

Table of Contents