1General Information
1.1 Overview
Tracer-CN/EM1 series adopts common negative design and advanced MPPT control
algorithm, and introduces original dry contact design to achieve the switch of external
equipment. The integration design not only replaces traditional electrical design
using external relay, what is more can achieve multiple control modes and working
modes, it can be widely used in household system, field monitoring and
communication station etc.
Feature:
Original dry contact design, achieve the switch of external equipment
Multiple dry contact control mode, local, remote and cross- network
Multiple dry contact working modes: manual control, light ON/OFF, light ON+timer
and time control
High tracking efficiency no less than 99.5%
Peak conversion efficiency of 97.5%, full-load efficiency of 96%
Accurately recognizing and tracking of multiple power points.
Battery temperature compensation function
Real-time energy statistics function
RS485 port with industrial standard MODBUS open architecture
Fully programmable function via PC software or remote meter
Support software upgrade.
1