Table of Contents
Advertisement
Quick Guide
1
1
1.4.2 The FC 101 Start-up Wizard for Open
Loop Applications
The built in "wizard" menu guides the installer through the
set up of the drive in a clear and structured manner in order
to setup an open loop application. A open loop application is
here an application with a start signal, analog reference
(voltage or current) and optionally also relay signals (but no
feed back signal from the process applied).
The wizard will initially be shown after power up until any
parameter has been changed. The wizard can always be
accessed again through the quick menu. Press [OK] to start
the wizard. If [BACK] is pressed, the FC 101 will return to the
status screen.
The wizard will initially start up after power up until a
parameter has been changed. The wizard can always be
accessed again through the quick menu. Press OK to start
the wizard.If "Cancel" is pressed, the FC 101 will return to the
status screen.
12
VLT HVAC Basic Drive FC 101 Quick Guide
FC
12
+24V
DIG IN
18
Start
19
DIG IN
20
COM DIG IN
27
DIG IN
29
DIG IN
+10V
50
+
A IN
53
Reference
A IN
54
COM
55
-
42
0-10V
A OUT / D OUT
45
A OUT / D OUT
01
02
03
04
05
06
Press OK to start Wizard
Push Back to skip it
Setup 1
MG.18.A1.02 - VLT
®
is a registered Danfoss trademark
Advertisement
Table of Contents
