Setting Direct Print Features - Panasonic DP-MB500 series Operating Instructions Manual

Note
• The following types of file formats can be printed:
– TIFF
– JPEG
– PDF (Image type only, such as files scanned from the unit or files scanned from the computer using
Quick Image Navigator.)
• Up to 8 characters are displayed for the file name.
• For details about the USB memory device, see page 142.
• If you select the same file you selected in step 3 and press OK/SET
*1
For 2-line LCD models only. (
What " " means (2-line LCD models only) (
" " next to a file name means the file is selected.

5.3.3 Setting direct print features

You can change the direct print settings. The settings are reset after each printing.
To select the paper input tray ("INPUT TRAY")
You can select the paper input tray for the direct print.
1. Select the desired setting.
2. OK/SET *1
*1 For 2-line LCD models only. (
Note
• Following options are displayed only when the paper size and the media type match. If either is changed,
this setting will be changed accordingly.
– "#1+#2"
– "#1+#3"
– "#1+#4" *1
– "#2+#3"
– "#2+#4"
*1
– "#3+#4" *1
– "#1+#2+#3"
– "#1+#2+#4"
*1
– "#1+#3+#4"
*1
– "#2+#3+#4"
*1
– "#1+#2+#3+#4"
*1
Only for models that support the lower input tray 2. (
To change the number of copies to print ("COPIES")
You can also change the default setting (feature #660).
1. Enter the number of copies (up to 99).
2. : OK/SET /
To change the orientation ("ORIENTATION")
You can change the print orientation.
You can also change the default setting (feature #661).
1. Select the desired setting.
2. OK/SET *1
*1
For 2-line LCD models only. (
)
)
)
*1
: "OK"
)
5.3.3 Setting direct print features
, the selection will be cancelled.
*1
)
Operating Instructions 75