Standard Input Tray - Panasonic DP-MB500 series Operating Instructions Manual

– Paper with foreign objects attached, such as tabs or staples
– Paper that has dust, lint or oil stains
– Paper that will melt, vaporize, discolour, scorch or emit dangerous fumes near 200 ℃, such as vellum paper.
These materials may transfer onto the fusing roller and cause damage.
– Moist paper
– Inkjet paper
– Chemically treated paper such as carbon or carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
• Some paper is designed to be printed on only one side. Try printing on the other side of the paper if you are
not happy with the print quality, or if misfeeding occurs.
• For proper paper feeding and best print quality, we recommend using long-grained paper.
• Do not use paper of different types or thicknesses at the same time. This may cause paper jams.
• Do not re-use paper printed from this unit for another printing job (including other copiers or printers). This
may cause paper jams.
• To avoid curling, do not open paper packs until you are ready to use the paper. Store unused paper in the
original packaging, in a cool and dry location.
• For customers who live in high humidity areas: Please be sure to store paper in an air-conditioned room at all
times. If you print using moist paper, it may cause paper jam.
To change the paper size and paper type
To use other paper sizes/types, see the following table and change the appropriate settings.
Tray type

Standard input tray

Multi-purpose tray (
Lower input tray 1 ( )
Lower input tray 2 ( )
• You should set the paper size to be the same size as the actual recording paper. If you load recording paper
that is smaller than the paper size setting, it will affect the printing quality.
• For number of sheets the unit can load, see page 187.
• For supported paper size, see page 186 for details.
Tray number information
The unit shows the tray number as follows instead of displaying the name of tray.
– "#1": Standard input tray
– "#2": Multi-purpose tray (
– "#3": Lower input tray 1 (
– "#4": Lower input tray 2 (
3.2.1 Standard input tray
• If you load more than the specified amount of paper, a paper jam may occur and the paper may be damaged.
• Depending on the type of paper, the loaded paper may exceed the upper limit mark ( ). In this case, remove
some paper from the tray.
1.
Pull the standard input tray (
completely out.
Paper sizes
feature #380
feature #381
)
feature #382
feature #389
)
)
)
) until it clicks into place, and then lift the front part of the tray and pull it
3.2.1 Standard input tray
Paper types
feature #383
feature #384
feature #385
feature #386
Operating Instructions 37