7.3.11 Sorting copies by rotation
7.3.11 Sorting copies by rotation
You can sort output into sets of documents (collated) or into sets of pages (uncollated).
Important
• Make sure of the following when setting recording paper into trays:
– Recording paper should set in portrait orientation for one paper tray, and in landscape orientation
for another paper tray.
– The paper set in each tray for this feature should be the same paper size and type.
1.
:
/PAGE LAYOUT (repeatedly): "ROTATE SORT"
: Display "Settings" screen (page 86).
2.
Select "ON".
OK/SET
*1
For 2-line LCD models only. (
Note
• Supported paper sizes are A4, Letter, B5(ISO)
*1
Not supported duplex printing.
Collated pages
3
2
1
1
Uncollated pages
3
2
1
1
7.3.12 To make copies with
Important
• Make sure that the paper size of the multi-purpose tray (feature #381) is set to the same as the
document size beforehand.
1.
Set the document as described below.
• Make sure to align the document with the corner where the
2.
Select the size of the original and "#2" for input tray from the copy size settings.
3.
If necessary, change the resolution and contrast according to the type of document.
• To select the contrast, see page 87.
• To select the resolution, see page 87.
4.
If necessary, enter the number of copies (up to 99).
5.
Press
/START to scan the upper half.
100
Operating Instructions
*1
)
3
3
2
2
1
1
3
1
3
3
,
,
"A3"
"11 × 17"
"ROTATE SORT"
, B5(JIS)
and 16K
.
*1
*1
*1
, or
documents (scanner glass only)
"8K"
"B4"
mark is located.