Sending An Internet Fax - Panasonic DP-MB500 series Operating Instructions Manual

8.8.1 Sending an Internet fax

To activate this feature, set the following beforehand:
1. Program the email server settings for Internet fax.
1. Start Multi-Function Station.
2. [Device] [Configuration Web Page]
3. Type "root" as the user name, then enter the password (feature #155).
4. Select the [EMAIL FEATURE] from the menu.
5. Click [Edit] next to [EMAIL FAX SERVER].
6. Enter email address (from), email server information, and time zone.
• To use the direct SMTP for Internet fax, enter the email address (from).
7. [Submit]
8. Close the web browser.
2. Register email address destinations (recommended).
See page 66 for details.
3. Activate the direct SMTP setting (feature #425) (recommended).
/MENU
*1
For 2-line LCD models only. (
8.8.1 Sending an Internet fax
• We recommend to register email destinations beforehand.
– To use the address book, see page 66.
– To use the one-touch dial (
1.
Set the original.
2.
If necessary, change the resolution (page 106) and contrast (page 106) according to the type of document.
3.
: /FAX
• To scan a 2-sided original, select the desired binding of the original.
• To scan a 1-sided original, select "OFF".
: "EMAIL FAX"
• To scan a 2-sided original, tap "DUPLEX".
4.
Enter the destination email address (page 120).
5.
/START
When using the scanner glass, scan the 1st page.
: To scan the next page, place the document and press OK/SET . Repeat this until all the
documents are scanned, then press
: To scan the next page, place the document and press "Scan". Repeat this until all the documents
are scanned, then press "Start".
Internet fax auto redial
If there is a problem with the LAN connection or if there is no answer, the unit will automatically resend the
document 2 or more times.
Specifying the destination
Using dial keypad
: (repeatedly): "ENTER ADDRESS"
: "Address Book"
Using address book
: (repeatedly): Display the desired item.
: "Address Book"
120 Operating Instructions
4 2 5 Select "ON".
)
), see page 67.
/E-MAIL (repeatedly): "EMAIL SEND"
OK/SET
"Send"
/START .
"ENTER ADDRESS"
Select the desired item.
[Network]
OK/SET
*1
OK/SET
OK/SET
Select the desired binding of the original.
/START enter the email address.
enter the email address.
[OK]