Table of Contents
Advertisement
8.9 Programming features: Fax
Feature
Fax receive notify
Fax to email
address setting
All received fax
erase
Set fax features to
default
*1
LAN supported models only (
126
Operating Instructions
Code
Description
#451
When this feature is activated, the computer connected to
your unit using USB/LAN
fax document is received.
Note
• When connecting to the LAN (
computers to which fax reception notifications will be
sent through the web browser interface.
Select the PC to send fax reception notification message to
(up to 6 destinations).
1.
Start Multi-Function Station.
2.
[Device]
3.
Type "root" as the user name, then enter the
programming password (feature #155).
4.
Select the [FAX FEATURE] from the menu.
5.
Select [ON] from the [RECEIVE NOTIFY] drop-down list.
6.
Click [Edit] next to [RECEIVE PC LIST].
7.
Click [List] next to the desired destination.
8.
Click the desired PC from the list.
9.
Close the web browser.
#452
If you wish to transfer a received fax document to desired
email address, activate this feature (page 118).
#458
To erase all received fax memory.
• Disconnect the following cables before activating this
feature.
– Telephone line cord
– USB cable
– LAN cable (LAN supported models only) (
#459
To reset fax features to their default settings.
)
will receive a notification when a
*1
): Register
[Configuration Web Page]
[Submit]
Default
key
0
[Device]
[OK]
0
–
)
–
Hide quick links:
Advertisement
Table of Contents
