Fax; Availability Of The Fax Feature; Preparation For Sending A Fax; Touch Panel Screens For Fax - Panasonic DP-MB500 series Operating Instructions Manual

8 Fax

8.1 Availability of the fax feature

Important
• The fax feature may not be available for your unit. See "
equipment" on page 11 whether your unit has the feature.

8.2 Preparation for sending a fax

We recommend programming the following so that they appear on the top of each page sent.
– Date and time (feature #101)
– Your logo (feature #102)
– Fax number (feature #103)

8.3 Touch panel screens for fax

COPY FAX
QUICK JOB

8.4 Basic procedure for sending a fax

Important
• Set the unit to the fax mode.
1.
Set the original.
2.
If necessary, change the resolution, contrast and duplex setting according to the type of document.
3.
Dial the fax number or select the destination from stored items.
4.
/START
When using the scanner glass, scan the 1st page.
: To scan the next page, place the document and press OK/SET . Repeat this until all the
documents are scanned, then press
: To scan the next page, place the document and press "Scan". Repeat this until all the documents
are scanned, then press "Send".
Note
• To change the contrast/resolution/duplex setting, see the following.
– "To select the contrast" (page 106)
– "To select the resolution" (page 106)
– "To select the duplex setting" (page 106)
• If the line is busy or if there is no answer, the unit will automatically redial the number 2 or more times in the
following functions.
– Sending a fax
– Broadcast transmission (
– Redialling using
*1 For broadcast transmission, the line will be skipped and redialled later.
SCAN PRINT
/START .
)
*1
: /REDIAL /
List of available features and
Standard
Resolution
Contrast
Off
Pause
Duplex
Settings
Email FAX
: "Redial"
8 Fax
Address Book
Ringer Volume
Flash
Monitor
Operating Instructions 105