Table of Contents
Advertisement
10.10 Central Management Controller
You can manage and operate Multi-Function Printers via the network using this system.
– You can monitor the number of printed pages and error information for each Multi-Function Printer as an
administrator.
– You can update firmware and driver software of multiple Multi-Function Printers at once.
– When a system error occurs in a Multi-Function Printer, this system can notify you by sending an email.
and more.
Please refer to the following URL for details.
http://panasonic.net/pcc/support/fax/world.htm
10.11 Distinctive Ring service
When a call is made to one of your phone numbers, the telephone company sends a ring pattern to your
telephone line to indicate which number the call is intended for. By setting up this unit for Distinctive Ring, you
can make the unit automatically start fax reception when a call comes to the fax number.
To use this service, you must subscribe to the Distinctive Ring service offered by your local telephone
company. Consult your local telephone company for availability.
Important for CX models users:
• Not available when Tunisia is selected in feature #114.
• Not available when Malaysia is selected in feature #114.
10.11.1 Using two or more phone number on a single telephone line
To activate this feature, set the following beforehand:
1.
/MENU
*1
For 2-line LCD models only. (
Note
• While the Distinctive Ring feature is activated, you cannot change the receiving mode.
How phone calls and faxes are received
If the incoming call is for the fax number, the unit will ring with the assigned ring pattern and automatically start
fax reception.
If the incoming call is for the phone number, the unit will continue ringing.
• If an external telephone answering machine is connected, set the ring count of the answering machine to more
than 2.
10.11.2 Using three or more phone numbers on a single telephone line
You may wish to use three or more phone numbers for a single telephone line. In order to distinguish which
number the call was addressed to, a different ring pattern must be assigned for each number.
Example: Using three phone numbers
Telephone number
012 1234
012 5678
012 9876
To use one phone number for the fax, program the ring pattern assigned for the fax (feature #431). In the
example, the ring pattern assigned for fax is a triple ring, so you should program "C" (triple ring).
10.11.3 Programming the ring pattern assigned for fax
1.
Set feature #430 to "ON".
2.
/MENU
4 3 0
Select "ON".
)
Ring pattern
Standard ring
Double ring
Triple ring
4 3 1
10.10 Central Management Controller
OK/SET
*1
Use
Personal
Business
Fax
Operating Instructions
143
Hide quick links:
Advertisement
Table of Contents
