Table of Contents
Advertisement
9.2 Programming features: LAN
Feature
Proxy server
IP filtering
Auto IP
HTTPD
IPv6 protocol
WINS server #1
WINS server #2
WSD (Web
Service for
Devices)
AirPrint
Address book
editing on web
Caller ID list on
web
Journal on web
128
Operating Instructions
Code
Description
#531
To set the proxy server for LAN connection.
1.
/MENU
2.
Select "ENABLED".
3.
Select the desired access type.
4.
Enter the IP address or domain name.
OK/SET /
• A domain name is up to 63 characters.
5.
Enter the port number.
: "OK"
*1
For 2-line LCD models only. (
#532
When this feature is activated, the unit will deny/approve
access from the pre-programmed IP patterns. You can
program whether to deny or approve IP addresses. Up to 4
patterns each for IPv4 and IPv6 can be programmed through
the web browser interface (page 131).
#533
To set the IP address automatically for the LAN connection.
This feature is available when feature #500 is activated.
When this feature is activated, IP address will be allocated
automatically without using a DHCP (Dynamic Host
Configuration Protocol) server.
#534
To set HTTPD for the LAN connection. When this feature is
activated, you can access to the web server.
#535
When this feature is activated, IPv6 protocol can be used.
After installing the printer driver, be sure to change the port
to IPv6 protocol. You can check the IPv6 protocol address by
printing the "SETUP LIST" (page 133).
Note
• To activate this feature, you need to turn the power
switch of the unit OFF, then ON.
#538
To set the primary WINS server for the LAN connection. This
feature is available when feature #500 is deactivated.
#539
To set the secondary WINS server for the LAN connection.
This feature is available when feature #500 is deactivated.
#557
To activate the WSD (Web Service for Devices).
#559
To activate the AirPrint feature.
#567
When this feature is activated, you can check and edit the
address book through the web browser interface.
#568
When this feature is activated, you can check the Caller ID
list through the web browser interface (page 134).
#569
When this feature is activated, you can check the journal
report through the web browser interface (page 134).
5 3 1
OK/SET
*1
OK/SET
: "OK"
: OK/SET /
)
Default
key
*1
:
0
0
0
1
0
–
–
1
1
1
1
1
Hide quick links:
Advertisement
Table of Contents
