Cover Shaft Unit - Star WinType 800C Technical Manual

PARTS REPLACEMENT

10. Cover Shaft Unit

1 Thermal Head
6 Power Supply (First Half)
[Remove]
(1) Remove the Self-tap Screws (6 places/M3 X 20) fastening the Shaft of the Cover shaft unit in the Upper
Mechanism and the Self-tap Screws fastening the Metal Plate (2 places/M3 X 10).
Be careful because the Spring Cover L and R will come loose when doing this.
Self-tap Screws (M3 X 10)
Spring Cover L
Self-tap Screws (M3 X 20)
[Caution in assembly]
Attachment is done by reversing the procedures used for removal.
Be careful of the direction of the L and R Spring Covers.
3 Centronics I/F PC Board
10 Cover Shaft Unit
Cover Shaft Unit
Self-tap Screws (M3 X 20)
– 30 –
4 Engine PC Board
Self-tap Screws (M3 X 10)
Spring Cover R