Table of Contents
Advertisement
PARTS REPLACEMENT
(3)
Remove the SW-PW-P Pan Head Screws (5 places/M3 X 10) fastening the I/F Cover.
(4)
Remove the Self-tap Screws (4 places/M3 X 10) fastening the Centronics I/F PC Board.
(5)
Remove Harness I/F J11 Connector and Control PC Board Harness Connector from the Centronics I/F PC
Board.
Harness I/F J11
Centronics I/F PC Board
[Caution in assembly]
Attachment is done by reversing the procedures used for removal.
The Harness Connector for the Control PC Board should be attached so that the blue mark can be seen.
Self-tap Screws (M3 X 10)
– 22 –
Control PC Board Harness
I/F Cover
SW-PW-P Pan Head Screws
(M3 X 8)
Advertisement
Chapters
Table of Contents
Troubleshooting
