Table of Contents
Advertisement
4-2. Attaching the Rubber Feet
(1) Ensure that any soiling has been completely wiped off before attaching the rubber feet.
(2) Attach the four rubber feet in the positions shown in the figure.
4-3. Switch Cover Installation
It is not necessary to install the switch cover. Only install it if it is necessary for you. By installing the switch cover, the
following become possible.
• Preventing the power switch from being operated by mistake.
• Ensuring that other people can not easily operate the power switch.
Install the switch cover as shown in the diagram below.
The power switch can be turned ON (
the switch cover.
) and OFF (O) by inserting a narrow instrument (ball pen etc.) in the holes in
|
- 27 -
Advertisement
Table of Contents
