Power Supply (Second Half) - Star WinType 800C Technical Manual

7.

Power Supply (Second Half)

1 Thermal Head
6 Power Supply (First Half)
[Remove]
(1) Remove the Self-tap Screws (2 places/M3 X 10) fastening the Plate Earth Head.
(2) Remove the Self-tap Screws (2 places/M3 X 10) fastening the Power Supply.
(3) Remove the Power Supply by lifting it up. Be careful because the Plate Power will come loose.
(4) Remove the Harness Head Power and the Harness Engine J30 from the Power Supply.
[Caution in assembly]
Attachment is done by reversing the procedures used for removal.
3 Centronics I/F PC Board
7 Power Supply (Second Half)
Self-tap Screws (M3 X 10)
Power Supply
Power Supply
Plate Power
– 27 –
PARTS REPLACEMENT
4 Engine PC Board
Plate Earth Head
Harness Engine J30
Harness Head Power