Star WinType 800C Technical Manual page 47

TROUBLESHOOTING
2-2-2. Ready lamp – Flashing; Film Roll lamp – Lit
Turn OFF the printer and
separate the Film Roll
mark from the Film Roll
DOWN sensor and
perform a self test print
Is the Film Roll being
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
taken up in the reel?
Yes
After the Film Roll
motor stops, does the
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Ready lamp flash?
Yes
No
Is the Film Roll UP
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
sensor connected?
Yes
Is the Film Roll
No
DOWN sensor
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
connected?
Yes
No
The film roll bobbins
and the bobbin gears
are not meshing.
Film Roll Motor failure
No
Paper related failure
The Film Roll UP sensor
is disconnected.
The Film Roll DOWN
sensor is disconnected.
Film Roll UP sensor
failure
Film Roll DOWN
sensor failure
Engine PC Board failure
Diagnosis How to Handle
Install the Film
Roll Motor.
Replace the Film Roll
Motor
Diagnosis How to Handle
See the Trouble-
shooting chart
concerning paper.
Diagnosis How to Handle
Properly connect it
Diagnosis How to Handle
Properly connect it
Diagnosis How to Handle
Replace the Roller
Base Unit.
Replace the Base
Unit.
Replace the Engine
PC Board.
– 50 –
Ref. Page
Page 28
Page 28
Ref. Page
Page 59
Ref. Page
–
Ref. Page
–
Ref. Page
Page 34
Page 29
Page 23