Star WinType 800C Technical Manual page 20

PARTS REPLACEMENT
(2) Lift up the Paper Motor and remove the Connector. (Two places in the motor and sensor.)
When doing this, the Spring Paper Motor will come loose. Be careful not to lose it.
Spring Paper Motor
[Caution in assembly]
Attachment is done by reversing the procedures used for removal.
Insert the Base Pin into the rear groove of the Paper Motor from the front and insert the Base Pin into the front
groove of the Paper motor coming down from above.
After attaching, check to make sure that springs for the Spring Paper Motor are securely fastened. When pushing
down on the Paper Motor from above, the Paper Motor should move smoothly back to its original position with the
force of the Springs.
Connector
– 20 –
Connector
Paper Motor