Table of Contents
Advertisement
1-3.
Error Messages Displayed with Windows
Type
No.
1
2
When using
"Fast Print to
Port"
3
4
•
After removing the causes of the errors for Nos. 1 through 3, printing will start automatically when you click
on the "Retry" button.
•
If you are not using "Fast Print to Port," Windows Print Manager will display the error messages.
Error Message
Out of paper. Please load the
printer with paper.
Can't connect to the printer.
Check the power supply, the
printer cable, or the "Online"
state.
A printer error has occurred.
May be out of Film Roll, paper is out or there was a temperature error with
jam, an abnormal head temper-
ture, etc.
A printer error has occurred.
Can't resume the print job.
What to Do
Add more paper and press the "Retry" button
after checking that the printer is in the
"Online" mode.
After checking the following items, click the
Retry button.
• Is the power turned ON?
• Is the cable securely connected?
• Is the printer in the "Online" mode?
It is possible that the film roll is empty, paper
the Thermal Head. Retry to print after
refering to the section dealing with failures.
It is possible paper became jammed after
printing. Remove the jammed paper.
The remaining image cannot be printed, so
send the print command again.
– 47 –
TROUBLESHOOTING
Advertisement
Chapters
Table of Contents
Troubleshooting
