Rear Cover Unit; Front Cover And Case Unit - Star SP700 Series Technical Manual

3
1
3
2
1
A
4
2
2

1. Rear Cover Unit

1. Turn the power switch 1 off and unplug the power
plug from the AC outlet.
2. Pull the open lever 2 toward yourself to open the
rear cover.
3. Removal
• 4 screws 3
• Rear cover unit 4

2. Front Cover and Case Unit

1. Turn the power off and unplug the power plug from
the AC outlet.
2. Open the front cover 1 .
3. Removal
• 3 screws 2
There is a little play in the printer mechanism by first
removing the screws fastening the case unit. This will
make it easier to remove the front cover 1 .
• Front cover 1
Remove the front cover with the procedures below.
(1) Widen the A portion on the right side of the front
cover 1 to remove from the front cover from the
mechanism.
(2) Lift the right side removed from the mechanism.
- 10 -