Motor Cable - Danfoss VLT FC 103 Operating Instructions Manual

Installation
F
E
Illustration 3.51 IP00 Enclosure Power Connections Positions of Disconnect Switch
NOTICE
Power connections can be made to positions A or B
Enclosure
Unit type
type
IPOO/CHASSIS
250/315 kW (400 V) AND 355/450-500/630
E2
KW (690 V)
315/355-400/450 kW (400 V)
Table 3.6 Dimensions for Disconnect Terminal

3.4.5 Motor Cable

Connect the motor to terminals U/T1/96, V/T2/97, W/T3/98.
Ground to terminal 99. All types of 3-phase asynchronous
standard motors can be used with a frequency converter
unit. The factory setting is for clockwise rotation with the
frequency converter output connected as follows:
Terminal no. Function
96, 97, 98, Mains U/T1, V/T2, W/T3
99 Ground
Table 3.7 Terminals for Motor Cable Connection
MG16J202
Operating Instructions
0
[ 0.0 ]
A B
396 (15.6) 268 (10.6)
408 (16.1) 239 (9.4)
Danfoss A/S © Rev. 05/2014 All rights reserved.
Dimensions [mm]/(inch)
C D
333 (13.1) 398 (15.7) 221 (8.7)
319 (12.5) 399 (15.7) 113 (4.4)
3
E F
N/A
153 (6.0)
47
3