Alternator Belt Inspection; Compressor Air Intake Filter - Mercury 200 Sport-Jet Operation & Maintenance Manual

Alternator Belt Inspection

Inspect the alternator belt and have it replaced by an authorized dealer if any of
the following conditions are found.
• Cracks or deterioration in the rubber portion of the belt
• Belt surfaces rough or uneven
• Signs of wear on the edges or outer surfaces of the belt

Compressor Air Intake Filter

The filter should be changed every 100 hours of operation, or once a season.
IMPORTANT: Never run the engine without the air filter.
REMOVAL
1. Remove the flywheel cover from the engine.
2. Snap the retainer out of the cover and remove the filter.
INSTALLATION
1. Install the filter into the cover.
MAINTENANCE
a
b
29397
29398
a - Retainer
b - Filter
56
eng