Warranty Coverage And Exclusions - Mercury 200 Sport-Jet Operation & Maintenance Manual

Hide thumbs Also See for 200 Sport-Jet:
Table of Contents

Advertisement

Corrosion damage caused by stray electrical currents (onshore power
connections, nearby boats, submerged metal) is not covered by this corrosion
warranty and should be protected against by the use of a corrosion protection
system, such as the Mercury Precision Parts or Quicksilver MerCathode
system and/or Galvanic Isolator. Corrosion damage caused by improper
application of copper base antifouling paints is also not covered by this limited
warranty. If antifouling protection is required, Tri‑Butyl‑Tin‑Adipate (TBTA) base
antifouling paints are recommended on Outboard and MerCruiser boating
applications. In areas where TBTA base paints are prohibited by law, copper
base paints can be used on the hull and transom. Do not apply paint to the
outboard or MerCruiser product. In addition, care must be taken to avoid an
electrical interconnection between the warranted product and the paint. For
MerCruiser product, an unpainted gap of at least 38 mm (1.5 in.) should be left
around the transom assembly. Refer to the Operation and Maintenance Manual
for additional details.
For additional information regarding events and circumstances covered by this
warranty, and those that are not, see the Warranty Coverage section of the
Operation and Maintenance Manual, incorporated by reference into this
warranty.
DISCLAIMERS AND LIMITATIONS:
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE
EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED
WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES
ARE EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME
STATES/COUNTRIES DO NOT ALLOW FOR THE DISCLAIMERS,
LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A RESULT,
THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO
COUNTRY.

Warranty Coverage and Exclusions

The purpose of this section is to help eliminate some of the more common
misunderstandings regarding warranty coverage. The following information
explains some of the types of services that are not covered by warranty. The
provisions set forth following have been incorporated by reference into the
Three Year Limited Warranty Against Corrosion Failure, the International
Limited Outboard Warranty, and the United States and Canada Limited
Outboard Warranty.
Keep in mind that warranty covers repairs that are needed within the warranty
period because of defects in material and workmanship. Installation errors,
accidents, normal wear, and a variety of other causes that affect the product
are not covered.
WARRANTY INFORMATION
4
eng

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents