Compressor Air Intake Filter; Alternator Belt Inspection - Mercury 150 Operation, Maintenance And Installation Manual

Description
Spark plug

Compressor Air Intake Filter

The filter should be changed every 100 hours of operation, or once a season.
IMPORTANT: Never run the engine without the air filter.
REMOVAL
1. Remove the flywheel cover from the engine.
2. Snap out the retainer and remove the filter.
INSTALLATION
1. Install the filter into the cover.
2. Secure the filter into cover with the retainer.

Alternator Belt Inspection

Inspect the alternator belt and have it replaced by an authorized dealer if any of
the following conditions are found:
• Cracks or deterioration in the rubber portion of the belt.
• Belt surfaces rough or uneven.
MAINTENANCE
a
b
29397
54
Nm lb‑in.
27 –
a - Retainer
b - Filter
lb‑ft
20
eng