Section 4 - Maintenance
Shift Cable
Lubricate the pivot points and guide contact surfaces.
a
Tube Ref No.
SAE Engine Oil 30W
80
Drive Belts
All drive belts must be periodically inspected for tension and condition, such as excessive wear, cracks, fraying, or glazed
surfaces.
Inspecting the belts with the engine running may cause serious injury or death. Turn off the engine and remove the ignition
key before adjusting tension or inspecting belts.
Power‑Assisted Steering Pump Belt Inspection
The 2.0 diesel engine uses a stretch‑belt to drive the power‑assisted steering pump. The stretch‑belt is engineered to have a
certain amount of elasticity and designed to have self tensioning and vibration damping characteristics not found in standard
serpentine accessory drive belts. Stretch‑belt service and maintenance procedures differ from standard accessory drive belts.
Should the power‑assisted steering pump stretch‑belt need replacement, consult your Mercury Diesel authorized repair facility.
1.
Inspect the power–assisted steering stretch‑belt for the following:
•
Excessive wear
•
Cracks
•
Fiber fraying
•
Glazed surfaces
Page 56
b
13347
Description
b
25603
Typical inboard model shift cable and transmission linkage
a -
Pivot points
b -
Guide contact surface
Where Used
Shift cable pivot points and guide contact surfaces
WARNING
!
2.0L front cover removed
a -
Serpentine belt
b -
Power‑assisted steering belt
a
Obtain Locally
90-8M0113986
DECEMBER 2015
eng
Part No.