Mercury 200 Sport-Jet Operation & Maintenance Manual page 71

Tube Ref
No.
66
Description
Stator bolts
Ride plate screws
ADDING OR REFILLING LUBRICANT
a
a - Fill hole
b - Reverse gate (bottom edge)
c - Rudder (outside diameter)
High Performance Gear Lube
1. Insert the nozzle of the lubricant tube in the fill hole on the stator.
2. Add lubricant until it appears at the hole.
3. Install the plug.
4. Apply Loctite 271 Threadlocker to four nozzle screws. Install the nozzle
assembly and anode. Secure with four screws. Tighten the screws to the
specified torque.
Tube Ref
No.
7
eng
MAINTENANCE
Description
Loctite 242
Threadlocker
Fluid Type
Description
Loctite 271
Threadlocker
Where Used
Stator bolts and ride plate screws
Nm
47
8.5
b
Where Used
Nozzle screws
61
Part No.
92-809821
lb‑in. lb‑ft
– 35
75 –
c
5474
Capacity
562 ml (19 fl oz)
Part No.
92-809819