Description
Spark plug
7. Inspect the expansion chamber gasket on the adapter plate. Do not
remove the gasket from the adapter plate. Replace if damaged.
8. Install the expansion chamber. Tighten the mounting nuts to the specified
torque. Install the hoses to the expansion chamber and secure with
clamps.
Description
Expansion chamber mounting nuts
9. Inspect the exhaust system for leaks.
Flywheel Cover Removal and Installation
REMOVAL
1. Detach the retaining strap.
2. Remove the cover by lifting off from the back of the engine.
a -
Flywheel cover
b -
Retaining strap
INSTALLATION
1. Lower the cover opening onto the air plenum intake flange. Tilt the cover
side to side until the cover slides down onto the intake flange.
MAINTENANCE
Nm
27
Nm
27
54
lb‑in.
–
lb‑in.
–
a
b
44578
lb‑ft
20
lb‑ft
20
eng