Display" Setting; Regional" Setting - InfraTec VARIOCAM HD User Manual

Thermography System VarioCAM ® HD
9. Introduction

9.4.8.1 "Display" Setting

Fig. 180 Settings for display and viewfinder
®
The "Display" sub-menu can be used in order to select the display settings for the VarioCAM HD. In the
standard configuration (factory settings) the display is switched from the display to the viewfinder* when
the display is folded to the camera housing (active display: automatic). However, you can fixedly set
Display or Viewfinder (Finder) as active display element.
The brightness values of display and viewfinder can be set independently using the levels "Bright",
"Medium" and "Dimmed". When the ambient lighting conditions are "normal", the brightness setting
"Medium" is absolutely sufficient for the display; in dark conditions, the setting "Dimmed" should be
selected.
The DVI-D output can also be set, with the formats 768 p and 800 p being the available selection options.
Regarding the FBAS interface (TV output), it is possible to toggle between the standards PAL and NTSC.

9.4.8.2 "Regional" Setting

Fig. 181 Settings for "Region and language"
The sub-menu "Regional" can be used in order to set the language, the date format, the date separator
and the time format. Number and selection of the languages available in each case depend on the
equipment. The units for the distance and for the temperature can also be set.
76 © InfraTec GmbH 2016 User Manual