InfraTec VARIOCAM HD User Manual page 29

Thermography System VarioCAM
8. Introduction
Ex factory, the functions are assigned to the function buttons in such a way that functions required very
frequently can be executed quickly:
Button Type
Short
Long
Long
Short
Long
Short
Long
Short
Long
Halfway
Complete
The function of the save button
9.2.7 Menu item "Saving format" – page 55).
Furthermore, the save button
function shortens the navigation and is activated ex factory, but can also be deactivated (see chapter
9.4.8 Menu item "System" – page 75).
The multi-function joystick
buttons , , , , as well as the function
The focus rocker switch
■ Manually focus the infrared image:

change the focus to longer distance  push left

change the focus to shorter distance  push right
■ Or to focus automatically:
center function of the focus rocker switch.
The Power button is used to switch on the VarioCAM
side above the button will start to flash green and the logo of the camera manufacturer is displayed on
the camera display. Upon successful system initialisation, the status LED will be illuminated permanently
®
green: the VarioCAM HD is now ready to operate. The system start takes approx. 30 seconds.
Fig. 23 System initialisation indication
In order to switch off the VarioCAM
User Manual
® HD
Function
Autoimage
NUC
Menu Level/Range
Spot ON/OFF
Spot editor
Laser ON/OFF
Max/Min ON/OFF
IR  VIS
Color  SW
LED ON/OFF
FREEZE
when saving images is defined in the "Image" menu (see chapter
can be used in order to immediately accept inputs in many menus. This
can be used to navigate and to select functions, to input using the arrow
can be used in order to
® HD, please also use the power button
© InfraTec GmbH 2016
Explanation
Automatic adaptation temperature scale
Non-uniformity correction (compensation)
For manually setting Level/Range
If no ROI was created yet  create spot 1
Otherwise hide/display ROI
ROI settings
Mark and range finder
Global max/min measurement On/Off
Switch-over image mode
For manually setting Max/Min
Photo lamp
Subsequent image saving possible using
(Enter, push the center).
® HD. Initially, the status LED on the left-hand
.
27