Menu Item "System - InfraTec VARIOCAM HD User Manual

Thermography System VarioCAM
9. Introduction
Fig. 176 Loading the configuration
Fig. 178 Loading the factory settings
As an alternative to a configuration name generated automatically consisting of a date and a time, e.g.
cfg_20120622_1530, a name consisting of a maximum of 20 characters can be edited in order to save
the configuration.
When loading the factory settings, all previously made system settings will be undone. If settings
must possibly be re-used at a later point in time, we recommend saving a user configuration
beforehand.
9.4.8

Menu item "System"

Fig. 179 Menu item "System"
The "System" menu item contains the settings and information about the basic functions of the
®
VarioCAM HD. Along with the settings for language, date and time, which as a rule must only be
configured rarely, it is possible to set the brightness of the viewfinder* and the display, to set the font size,
as well as to make a number of further settings for representation and navigation within the menu,
amongst other things.
After the system settings were adapted to the individual requirements, we recommend saving the
settings in a user configuration.
User Manual
® HD
© InfraTec GmbH 2016
Fig. 177 Saving the configuration
75