Installation Checklist - ABB Conceptpower DPA 500 User Manual

4.3.5

Installation Checklist


All packing materials and restraints have been removed from each cabinet.

Each cabinet in the UPS system is placed in the installed location.

All conduits and cables are properly routed to the UPS and auxiliary cabinets.

All power cables are properly sized and terminated.

A ground conductor is properly installed.

If the cabinet does not use all module mounting locations, the provided protective covers are
installed on the front and back of the cabinet.

Battery cabinet installation instructions have been completed.

Air conditioning equipment is installed and operating properly.

The area around the installed UPS system is clean and dust-free. (It is recommended that the UPS
be installed on a level floor suitable for computer or electronic equipment.

Adequate workspace exists around the UPS and other cabinets.

Adequate lighting is provided around all UPS equipment.

Any optional accessories are mounted in their installed location and properly wired.

Summary alarms and/or building alarms are wired appropriately. (OPTIONAL)

Startup and operational checks performed by certified service personnel.
04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Modifications reserved
Page 24/78 ABB