Technical Specifications; Conceptpower Dpa 500 - System Description - ABB Conceptpower DPA 500 User Manual

Ups system 100 - 500 kw
Hide thumbs Also See for Conceptpower DPA 500:
Table of Contents

Advertisement

10 TECHNICAL SPECIFICATIONS

10.1 CONCEPTPOWER DPA 500 - SYSTEM DESCRIPTION

ABB's Conceptpower DPA 500 is a high-power, modular and transformer-free UPS system for organizations who
need zero downtime. The UPS is built using true online double conversion technology and provides low cost of
ownership.
True modularity up to 3 MW
Now you can have a UPS size to exactly fit your needs: the Conceptpower DPA 500 is the only modular UPS on the
market that can easily be scaled up to 3MW of clean, reliable power. This scalability means that there is no need to
over-specify the original configuration as power modules can simply be added, as needed, in the future.
True parallel architecture
Reliability and availability are ensured by the Conceptpower DPA 500's proven Decentralized Parallel Architecture
TM
(DPA
). Each module contains all the hardware and software required for full system operation. They share no
common components. Each UPS module has its own independent static bypass, rectifier, inverter, logic control,
control panel, battery charger and batteries. With all the critical components duplicated and distributed between
individual units, potential single points of failure are eliminated.
Key Features of CONCEPTPOWER DPA 500
100 kW rated power module
500 kW rated power in single frame
Extended power range: from 100 kW to 3 MW
Unity output power factor (kVA = kW)
AC-AC efficiency up to 96 %
Efficiency in eco-mode ≥ 99 %
Online Swap Modularity (OSM)
Online serviceability
Top or bottom cable entry (standard)
Built-in back-feed protection (standard)
Graphical display on system level
DPA displays in each module
This Technical Datasheet (TDS) provides all technical specification required by IEC 62040-3, providing mechanical,
electrical and environmental characteristics. It can be used for tendering and end-user requirements.
CONCEPTPOWER DPA 500 is designed to respond to the actual UPS standards which are:
safety, IEC / EN 62040-1
EMC, IEC / EN 62040-2
performance, IEC / EN 62040-3
04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Modifications reserved
Page 67/78 ABB

Advertisement

Table of Contents
loading

Table of Contents