User Interface - Communication; System Display - ABB Conceptpower DPA 500 User Manual

10.6 USER INTERFACE - COMMUNICATION

System Display

DPA display (or module display)
MIMIC diagram
RS232 on Sub-D9 port
RS232 on USB port
Customer Interfaces : Inputs
DRY PORT
Customer Interfaces : Outputs
DRY PORT
RS485 on RJ45 port
RS485 on RJ45 port
Slot for SNMP
10.6.1 System Display
The user-friendly touchscreen graphical display on the system level offers the opportunity of directly monitoring the
system status as well as the status of each individual module. The graphical display additionally provides all the
measurements (module and system level) and the user is able to transfer from INVERTER to BYPASS and vice-
versa. All other commands must be performed on the DPA display. With both displays in place (module and system
level), the UPS offers full user friendliness without making compromises on robustness.
7" touchscreen display (one per frame)
2 x 20 character LCD display (one per module)
LED-indicator, 5x green/red LEDS (one per module)
For monitoring and integration in network management
1 Remote Shut down [EMERGENCY OFF (Normally closed)]
1 GEN-ON (Normally open)
1 Programmable Customer's Inputs (Normally open)
1 Temp. Sensor for Battery Control
6 voltage free contacts
For remote signaling and automatic computer shutdown
Remote monitoring system with remote panel (graphical
display)
For multidrop purpose
SNMP card
For monitoring and integration in network management
04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-A.docx
Modifications reserved
Optional
Optional
Optional
Page 73/78 ABB