The Management Blade
10.3
Exchanging a Management Blade
V
CAUTION!
Observe the safety information and the information on handling electro-
static-sensitive components in the section "Components With Electro-
static Sensitive Devices" on page 18.
Removing the Management Blade
Figure 73: Disengaging the management blade (a = green touch point)
Ê Swing the eject handle (a) of the management blade in the direction of the
arrow until the locking mechanism disengages and the blade is pulled out a
few centimeters.
A26361-K863-Z102-8-7619
Exchanging a Management Blade
Rev. 8.0
115