Server Blade Pentium® M
8.2
Server Blade Pentium
The server blade Pentium
– Mono processor support (Pentium
– Two DIMM sockets for maximum 4 GB DDR-RAM 200 MHz
– Two integrated Ethernet controllers
– On-board IDE-RAID controller
– Two locations for 2.5-inch IDE hard disk drives
– On-board graphics controller ATI Rage XL 4MB
– Special connector for 2xUSB and VGA port (special cable required! (see
figure 38 on page 78)
– Connector for expanding with a PCI module (see section "PCI Modules" on
page 78).
Figure 35: Server blade Pentium
I
In any case of Windows operating systems, the license number must be
entered after installation the first time you start the operating system. You
find this license number on the COA label on the rear of the server blade.
Ê Note the license number for further use.
74
®
M includes (figure 36):
®
M CPU socket)
®
M - COA label
Rev. 8.0
The Server Blade
®
M
COA label
A26361-K863-Z102-8-7619