Table of Contents
Advertisement
Exchanging/Adding Procedures
Figure 43: Installing an SDRAM module (a = green touch points)
Ê Press the two levers (a) in the direction of the arrows (1) to disengage the
locking mechanism of the SDRAM socket.
Ê Position the SDRAM module so that the two notches on the bottom edge
align with the socket on the server blade (2).
Ê Insert the SDRAM module into the socket and press firmly in the direction of
the arrow (3) until it is seated correctly.
Ê Secure the SDRAM module by carefully pushing the two levers (a) into the
locking position (4).
82
Rev. 8.0
The Server Blade
A26361-K863-Z102-8-7619
Advertisement
Table of Contents
