Table of Contents
Advertisement
Exchanging/Adding Procedures
Figure 50: Exchanging battery on the server blade
Ê Press the locking spring in the direction of the arrow (1), so that the lithium-
battery jumps out of its socket and remove it (2).
Ê Insert a new lithium battery of the same type into the socket (3) and press in
the direction of the arrow (4), until it clicks into place.
8.5.5
Adding PCI Module to the Server Blade Pentium
V
CAUTION!
Observe the safety information and the information on handling electro-
static-sensitive components in the section "Components With Electro-
static Sensitive Devices" on page 18.
Server blades can be extremely sensitive to electrostatic discharge and
must always be handled carefully. Place it with the component side up on
a non-conductive, antistatic surface. Do not slide the server blade over
any surface.
88
Rev. 8.0
The Server Blade
A26361-K863-Z102-8-7619
®
M
Advertisement
Table of Contents
